Absylux® CN-F
(Conductive Acrylonitrile-Butadiene-Styrene)
|
|
Non-sloughing, carbon-fiberfilled
material with high strength and stiffness; easily machined.
The following physical property information is based on typical values of the resin.
|
| Electrical Properties |
| Property |
Units |
Test |
Result |
| Surface Resistivty dry |
ohm/sq |
ASTM D257 |
102 - 105 |
| Volume Resistivity dry |
ohm/cm |
ASTM D257 |
102 - 105 |
| Static Decay 15% RH |
seconds |
Mil-B-81705-B |
<0.1 |
|
| Mechanical Properties |
| Property |
Units |
Test |
Result |
| Tensile Strength @yeild |
psi |
ASTM D638 |
17,250 |
| Tensile Elongation @break |
% |
ASTM D638 |
2.5 |
| Flexural Strength |
psi |
ASTM D790 |
23,500 |
| Flexural Modulus |
psi |
ASTM D790 |
1,450,000 |
| Izod Impact Strength Notched |
ft·lbs/in |
ASTM D256 |
1.0 |
| Izod Impact Strength Un-notched |
ft·lbs/in |
ASTM D256 |
3.5 |
| Hardness-Shore D |
- |
ASTM D2240 |
- |
|
| Other Properties |
| Property |
Units |
Test |
Result |
| Specific Gravity |
- |
ASTM D792 |
1.14 |
| Water Absorption @24 hours |
% |
ASTM D570 |
0.25 |
|
| Thermal Properties |
| Property |
Units |
Test |
Result |
| Heat Deflection Temp. @264 psi |
°F |
ASTM D648 |
215 |
| Heat Deflection Temp. @66 psi |
°F |
ASTM D648 |
- |
| Flam. Rating-UL94 |
- |
- |
HB |
|
|
| Applications Include: |
| Disk drive assembly fixtures |
| Semiconductor/electronic components |
| Electronic component transfer trays |
| Telecommunications hardware |
| Automotive equipment |
| Advantages of Absylux® CN-F: |
| Good strength and stiffness |
| Cost effective |
| Easily machined |
| Good chemical resistance |
| Durable |
| Bondable |
| Manufacturing Capabilities: |
| Rod: 1/8” to 4” diameter |
| Sheet: .030” to 4” thick |
| Film: .010” to .029” thick |
|
*In addition to our standard capabilities, Westlake also
has the ability to process custom resins in various sizes
and colors with some exceptions.
|
|
