Propylux® HS2
(polypropylene-heat stabilized)
|
Download Product Brochure (23KB - pdf)
|
Through process improvement and advanced engineering, Westlake Plastics
introduces the next generation of heat-stabilized polypropylene. Propylux HS2 is
produced from a FDA and USP Class VI approved homopolymer resin, and exhibits
better heat and dimensional stability over Propylux HS. Recommended sterilization
techniques for Propylux HS2 include steam autoclaving and cold sterilization.
The following physical property information is based on actual tests performed on this product.
|
| Mechanical Properties |
| Property |
Units |
Test |
Result |
| Compressive Strength @yield |
psi |
ASTM D695 |
6,800 |
| Flexural Modulus |
psi |
ASTM D790 |
329,000 |
| Flexural Strength |
psi |
ASTM D790 |
9,370 |
| Hardness-Rockwell R |
- |
ASTM D785 |
R100 |
| Izod Impact Strength Notched |
ft·lbs/in |
ASTM D256 |
3.0 |
| Izod Impact Strength Un_notched |
ft·lbs/in |
ASTM D256 |
no break |
| Tensile Elongation @break |
% |
ASTM D638 |
70.0 |
| Tensile Elongation @yield |
% |
ASTM D638 |
5.0 |
| Tensile Modulus |
psi |
ASTM D638 |
319,000 |
| Tensile Strength @break |
psi |
ASTM D638 |
4,230 |
| Tensile Strength @yield |
psi |
ASTM D638 |
4,970 |
|
| Other Properties |
| Property |
Units |
Test |
Result |
| Specific Gravity |
- |
ASTM D792 |
.92 |
| Water Absorption @24 hours |
% |
ASTM D570 |
0.01 |
|
| Thermal Properties |
| Property |
Units |
Test |
Result |
| Coefficient of Thermal Expansion |
in/in/°F |
ASTM D696 |
4.37 x 10-5 |
| Heat Deflection Temp. @66 psi |
°F |
ASTM D648 |
309 |
| Heat Deflection Temp. @264 psi |
°F |
ASTM D648 |
201 |
| Flammability Rating–UL94 |
- |
- |
HB |
|
|
| Applications Include: |
| Provisional trials |
| Cranio-maxillofacial trays |
| Sterilization tray components |
| Advantages of Propylux® HS2: |
| Excellent chemical resistance |
| Laser markable |
| Lot controlled and traceable |
| Low moisture absorption |
| FDA resin |
| Superior dimensional stability |
| Manufacturing Capabilities: |
| Standard: |
Sheet: 1” to 21/2” thick
(1/2” increments) |
Sheet Sizes: 401/2”x48” (1” to 11/2” thick)
24”x48” (2” to 21/2” thick) |
| Non-Standard: |
| Rod: 3/8” to 4” diameter |
| Color/Grades: |
| Standard: white (custom colors available). |
|
*In addition to our standard capabilities, Westlake also has the
ability to process custom resins in various sizes and colors
with some exceptions.
|
|
Propylux® is a registered trademark of Westlake Plastics Co.
|
|
