PVDF CN-P
(Conductive KYNAR® Polyvinylidene Fluoride)
|
Download Product Brochure (39kb - pdf)
|
Carbon-powder-filled, thermally
stable, conductive material with consistent resistivities < 105. This material is extremely tough
with good flame and abrasion-resistance. Resistant to many chemistries and solvents, including
strong acids. Due to the carbon powder fill, this material is also available in film format as thin
as .002”.
The following physical property information is based on typical values of the resin.
|
| Electrical Properties |
| Property |
Units |
Test |
Result |
| Surface Resistivity dry |
ohm/sq |
ASTM D257 |
<105 |
| Volume Resistivity dry |
ohm/cm |
ASTM D257 |
<105 |
| Static decay |
seconds |
Mil-B-81705-B |
- |
|
| Mechanical Properties |
| Property |
Units |
Test |
Result |
| Tensile Strength @yeild |
psi |
ASTM D638 |
5,200 |
| Tensile Elongation @break |
% |
ASTM D638 |
15.0 |
| Flexural Strength |
psi |
ASTM D790 |
6,500 |
| Flexural Modulus |
psi |
ASTM D790 |
135,000 |
| Izod Impact Strength Notched |
ft·lbs/in |
ASTM D256 |
no break |
| Izod Impact Strength Un-notched |
ft·lbs/in |
ASTM D256 |
no break |
| Hardness-Shore D |
- |
ASTM D2240 |
- |
|
| Other Properties |
| Property |
Units |
Test |
Result |
| Specific Gravity |
- |
ASTM D792 |
1.74 |
| Water Absorption @24 hours |
% |
ASTM D570 |
<0.06 |
|
| Thermal Properties |
| Property |
Units |
Test |
Result |
| Heat Deflection Temp. @264 psi |
°F |
ASTM D648 |
133 |
|
|
| Applications Include: |
| Semiconductor/electronic components |
| Automotive assembly equipment |
| Petrochemical connectors and gaskets |
| Advantages of PVDF CN-P: |
| Outstanding chemical resistance |
| Elevated temperature compatibility |
| High strength |
| High impact resistance |
| Manufacturing Capabilities: |
| Rod: 1/8” to 4” diameter |
| Sheet: .030” to 4” thick |
| Film: .002” to .029” thick |
|
*In addition to our standard capabilities, Westlake also
has the ability to process custom resins in various sizes
and colors with some exceptions.
|
|
