Whether it’s for a die cut component, a thermoforming application, or a multilayer structure; Westlake Plastics extruded high performance films offer unique combinations of properties that enable you to match a specific film’s capabilities to your application needs.(Film gauges from 0.002” to 0.029” and up to 28” wide depending on material and gauge)
Absylux SD-A is a permanently anti-static Acrylonitrile Butadiene Styrene (ABS) with Surface Resistivity of 10^9–10^11 ohm/sq). The material is a non-carbon filled product, available in both natural and black color. It is ideal for protection against static discharge in electronic applications where contamination from potential sloughing of carbon powder would be concern. Absylux SD-A is easy to machine and fabricate.
Stock shapes extruded from Ardel®resin are specifically formulated to endure the damaging effects of UV light. When exposed to UV light, the material undergoes a molecular change resulting in the formation of a protective layer that essentially serves as a UV stabilizer. This inherent UV stability combined with superior retention of optical and mechanical properties make polyarylate an ideal choice for any application where weathering effects could pose a problem.
Arolux Polyetheretherketone (PEEK) is a semi-crystalline thermoplastic offering a combination of high-performance properties including high temperature resistance, very good wear & abrasion resistance, excellent dimensional stability and exceptional chemical resistance to organic acids, bases and good hydrolysis resistance in boiling water and steam.
Arolux Polyphenylene Sulfide (PPS) is a high performance semi-crystalline thermoplastic with continuous service temperatures up to 240°C. It offers high surface hardness and rigidity, very good chemical and oxidation resistance, very low water absorption, and is inherently flame-resistant (UL 94: V-0). PPS is a popular choice for structural applications in demanding chemical environments at elevated temperatures.
Pomalux SD-A is non-carbon-filled, permanently antistatic acetal co-polymer, which is non-migratory and non-humidity dependent. Natural in color, this material offers enhanced lubricity, provides superior wear resistance, and ease of machining. Exhibiting low outgassing and non-sloughing characteristics, it is optimal for applications where carbon sloughing cannot be accepted.
Westlake’s Radel® WM stock shapes are made exclusively from Solvay’s Radel® polyphenylsulfone (PPSU). Its regulatory compliance profile, and lot traceability make it ideal for use in medical and life science applications. Sterilization methods include EtO gas, radiation, steam autoclaving, dry heat, and cold sterilization.
Tempalux Polyetherimide (PEI) is an amorphous material offering a combination of useful characteristics, including high dielectric strength, high strength at elevated temperatures (up to 180C for extended periods of time), high modulus, and broad chemical resistance. Tempalux is inherently flame resistant with low smoke emission. The material displays property retention and resistance to environmental stress cracking when exposed to a wide variety of chemicals.
Tempalux WM is Westlake Plastics’ medical grade of polyetherimide (PEI). This material is FDA, USP VI and ISO-10993 compliant. Its regulatory compliance profile and lot traceability make it ideal for use in medical and life science applications. Sterilization methods include EtO gas, radiation, steam autoclaving, dry heat and cold sterilization.
Thermalux Polyethersulfone (PESU) An amber colored, semi-transparent, high performance engineering thermoplastic that combines good chemical resistance with a high heat deflection temperature (204°C / 399°F), making it a good fit for food service applications. This resin is also inherently flame retardant for use in electronic components and testing devices.
Thermalux Polyphenylsulfone (PPSU) is a high performance engineering thermoplastic that offers a superior combination of high performance properties that include excellent thermal stability (HDT of 207°C / 405°F), outstanding toughness, and good environmental stress cracking resistance.
Thermalux Polysulfone (PSU) is an amber colored, semi-transparent, heat-resistant, high performance engineering thermoplastic that offers higher heat resistance and better hydrolytic stability than polycarbonate (PC). It retains its good mechanical properties when exposed to steam and other sterilization techniques.
TPX Polymethylpentene (PMP) is a crystalline thermoplastic offering a unique combination of a very low-density value (0.82 g/cc), permeability, heat resistance and releasability (very low surface tension). TPX has outstanding low-dielectric properties which makes it an excellent candidate for high-frequency applications. TPX is an excellent choice for items that require steam sterilization.
Zelux CN-P is a conductive Polycarbonate (PC) utilizing carbon powder with surface resistivity dry 105 – 107 ohm/sq.. Zelux CN-P has low outgassing properties, high flexural strength and good thermal stability to 270°F. CN-P is UL94 V-0 rated at 0.030″ and is thermoformable in thinner gauges (0.010" – 0.060") and is easily machined.