Thin Sheet

Made from a broad range of resins, Westlake Plastics extruded and compression molded sheet can be run at various thicknesses and trimmed to size to meet your application requirements. Material stability, sheet size, yield versus cost, and surface finish are all factors to consider when choosing extrusion versus compression molded sheets.(from 0.030” to 0.1875” thick and up to 52” wide depending on the material)

  • Absylux (ABS)


    Absylux (ABS)

    Absylux is Westlake Plastics’ family of Acrylonitrile Butadiene Styrene (ABS). Absylux is an economical all-purpose engineering plastic exhibiting good dimensional stability, impact strength, and stiffness. Absylux is a popular choice for prototyping parts where low volumes and easy machining are required. Absylux can also be painted and is easy to bond with adhesives. Absylux is FDA Compliant in natural (beige) and black for food applications.

    See More
  • Absylux SD-A (ABS)


    Absylux SD-A (ABS)

    Absylux SD-A is a permanently anti-static Acrylonitrile Butadiene Styrene (ABS) with Surface Resistivity of 10^9–10^11 ohm/sq). The material is a non-carbon filled product, available in both natural and black color. It is ideal for protection against static discharge in electronic applications where contamination from potential sloughing of carbon powder would be concern. Absylux SD-A is easy to machine and fabricate.

    See More
  • Ardel PAR


    Ardel PAR

    Stock shapes extruded from Ardel®resin are specifically formulated to endure the damaging effects of UV light. When exposed to UV light, the material undergoes a molecular change resulting in the formation of a protective layer that essentially serves as a UV stabilizer. This inherent UV stability combined with superior retention of optical and mechanical properties make polyarylate an ideal choice for any application where weathering effects could pose a problem.

    See More
  • Fluorolux (PVDF)


    Fluorolux (PVDF)

    Fluorlolux Polyvinylidene Fluoride (PVDF) is a material which offers excellent corrosion and chemical resistance at both ambient and elevated temperatures. PVDF is also inherently UV stable, mechanically tough, and abrasion, flame, and smoke resistant.

    See More
  • Kynar 740 (PVDF)

    KYNAR 740

    Kynar 740 (PVDF)

    Westlake’s Kynar 740 stock shapes are made exclusively from Arkema’s Kynar 740 Polyvinylidene Fluoride (PVDF) resin. The material is an extremely tough engineering thermoplastic offering excellent corrosion and chemical resistance at both ambient and elevated temperatures.

    See More
  • Norylux (PPO)


    Norylux (PPO)

    Norylux modified Poly Phenylene Oxide (PPO) is a high strength amorphous engineering thermoplastic offers outstanding mechanical, thermal, and electrical properties along with low moisture absorption and low thermal expansion. Westlake Plastics extrudes and compression molds unfilled and flame-retardant products and compression molds glass reinforced and glass/mineral filled products.

    See More
  • Pomalux (POMC)


    Pomalux (POMC)

    Pomalux Polyoxymethylene (POMC) is a high-performance acetal copolymer used for a wide range of applications. Pomalux has good chemical and high-temperature resistance. Pomalux has good wear resistance and low frictional characteristics. Pomalux a good candidate for a wide range of structural and mechanical components that carry or transmit loads in dry or wet environments.

    See More
  • Pomalux SD-A (POMC)


    Pomalux SD-A (POMC)

    Pomalux SD-A is non-carbon-filled, permanently antistatic acetal co-polymer, which is non-migratory and non-humidity dependent. Natural in color, this material offers enhanced lubricity, provides superior wear resistance, and ease of machining. Exhibiting low outgassing and non-sloughing characteristics, it is optimal for applications where carbon sloughing cannot be accepted.

    See More
  • Propylux CN-P (PP)


    Propylux CN-P (PP)

    Propylux CN-P is a conductive polypropylene. It is a carbon powder filled, lightweight material with good chemical resistance, has low water absorption. Propylux is approximately 30% lighter weight than Pomalux.

    See More
  • Tempalux (PEI)


    Tempalux (PEI)

    Tempalux Polyetherimide (PEI) is an amorphous material offering a combination of useful characteristics, including high dielectric strength, high strength at elevated temperatures (up to 180C for extended periods of time), high modulus, and broad chemical resistance. Tempalux is inherently flame resistant with low smoke emission. The material displays property retention and resistance to environmental stress cracking when exposed to a wide variety of chemicals.

    See More
  • Tempalux WM (PEI)


    Tempalux WM (PEI)

    Tempalux WM is Westlake Plastics’ medical grade of polyetherimide (PEI). This material is FDA, USP VI and ISO-10993 compliant. Its regulatory compliance profile and lot traceability make it ideal for use in medical and life science applications. Sterilization methods include EtO gas, radiation, steam autoclaving, dry heat and cold sterilization.

    See More
  • Thermalux PESU


    Thermalux PESU

    Thermalux Polyethersulfone (PESU) An amber colored, semi-transparent, high performance engineering thermoplastic that combines good chemical resistance with a high heat deflection temperature (204°C / 399°F), making it a good fit for food service applications. This resin is also inherently flame retardant for use in electronic components and testing devices.

    See More
  • Thermalux PPSU


    Thermalux PPSU

    Thermalux Polyphenylsulfone (PPSU) is a high performance engineering thermoplastic that offers a superior combination of high performance properties that include excellent thermal stability (HDT of 207°C / 405°F), outstanding toughness, and good environmental stress cracking resistance.

    See More
  • Thermalux PSU


    Thermalux PSU

    Thermalux Polysulfone (PSU) is an amber colored, semi-transparent, heat-resistant, high performance engineering thermoplastic that offers higher heat resistance and better hydrolytic stability than polycarbonate (PC). It retains its good mechanical properties when exposed to steam and other sterilization techniques.

    See More
  • TPX (PMP)


    TPX (PMP)

    TPX Polymethylpentene (PMP) is a crystalline thermoplastic offering a unique combination of a very low-density value (0.82 g/cc), permeability, heat resistance and releasability (very low surface tension). TPX has outstanding low-dielectric properties which makes it an excellent candidate for high-frequency applications. TPX is an excellent choice for items that require steam sterilization.

    See More
  • Zelux CN-P (PC)


    Zelux CN-P (PC)

    Zelux CN-P is a conductive Polycarbonate (PC) utilizing carbon powder with surface resistivity dry 105 – 107 ohm/sq.. Zelux CN-P has low outgassing properties, high flexural strength and good thermal stability to 270°F. CN-P is UL94 V-0 rated at 0.030″ and is thermoformable in thinner gauges (0.010" – 0.060") and is easily machined.

    See More
  • Zelux M (PC)


    Zelux M (PC)

    Zelux M is a Machine grade Polycarbonate (PC). Zelux M offers excellent dimensional stability, toughness, strength, and rigidity, with service temperatures up to 250°F. This material has good insulating properties and is flame resistant.  Zelux is easy to fabricate, paint, and glue.

    See More
  • Zelux SD-P (PC)


    Zelux SD-P (PC)

    Zelux SD-P is static dissipative Polycarbonate (PC). It is a carbon-powder filled material with resistivity levels in the 107 – 111 ohm/sq. range with high flexural strength and good thermal stability to 270°F. The material is UL94 V-0 capable at 0.030.

    See More