Zelux® SD-P - Westlake Plastics

Typical Properties

Property	Test Standard	English Units	Metric Units
Mechanical
Flexural Modulus	D790	468 kpsi	3,230 MPa
Flexural Strength - 5%	D790	14.6 kpsi	101 MPa
Izod Impact Resistance - Notched	D256	1.79 ft-lb/in	96 J/m
Tensile Elongation @ Break	D638	8.30 %	8.30 %
Tensile Elongation @ Yield	D638	4.60 %	4.60 %
Tensile Modulus	D638	398 kpsi	2,750 MPa
Tensile Strength @ Break	D638	8.7 kpsi	60 MPa
Tensile Strength @ Yield	D638	9.7 kpsi	67 MPa
Thermal
HDT @ 264 psi	D648	248 °F	120 °C
HDT @ 64 psi	D648	269 °F	132 °C
Physical
Moisture Absorption	D570	0.11 %	0.11 %
Specific Gravity	D792	1.34	1.34
Electrical
Surface Resistivity	D257	10⁷ - 10¹¹ ohm/sq	10⁷ - 10⁹ ohm/sq
*Data above is based on testing of injection molded test specimens

Sheet Sizing

Film Sizing

Compression Sheet Sizing

48"L x 24"W

0.25" (6.35mm)

0.375" (9.53mm)

0.5" (12.7mm)

0.75" (19.05mm)

1" (25.4mm)

1.25" (31.75mm)

1.5" (38.1mm)

1.75" (44.45mm)

2" (50.8mm)

2.25" (57.15mm)

2.50" (63.5mm)

2.75" (69.85mm)

3" (76.2mm)

3.25" (82.55mm)

3.50" (88.9mm)

3.75" (95.25mm)

4" (101.6mm)

Extruded Sheet Sizing

96"L x 48"W

0.03" (0.76mm)

0.035" (0.89mm)

0.06" (1.52mm)

0.062" (1.57mm)

0.08" (2.03mm)

0.09" (2.29mm)

0.095" (2.41mm)

0.125" (3.18mm)

0.1875" (4.76mm)

0.25" (6.35mm)

Outlined below are the common gauges we produce.
Other gauges available, please call your Westlake Plastics Representative for details.

Roll Width: 26 in. +0.25 in/-0.00 in
Finish: Polish/Matte (P/M)
Gauge Tolerance: +/-10%
Standard Roll weight: 50 lbs.
Standard Core: 6" corrugated/fiber

26"W

0.002" (0.05mm)

0.005" (0.13mm)

0.010" (0.25mm)

0.020" (0.51mm)

0.025" (0.64mm)

Documentation

No documents found.